AKTAKOM AM-1118 Digital Multimeter with USB interface

AKTAKOM AM-1118 Digital Multimeter with USB interface Review

AKTAKOM AM-1118 Digital Multimeter with USB interface Feature

• multipurpose instrument
• 6000 digital display counts
• DC/AC Voltage up to 1000V
• Resistance up to 60 M?
• Capacity up to 300 mF

AKTAKOM AMM-1118 Measurements: DC voltage 0.1mV...1000V, AC voltage 1mV...700V, AC and DC current 0.1mA...10A, Resistance 0.1?...60M?, Capacitance 10pF ... 300?F, Temperature -20?C…1000?C, Frequency 1Hz...1MHz. Base accuracy 0.5%. Features: USB-interface with galvanic isolation, Auto range selection, Data hold, Relative measurements, Diodes test, Continuity test, Auto turn-off.

SE Clip Test Lead Set (10 Piece)

SE Clip Test Lead Set (10 Piece) Review

SE Clip Test Lead Set (10 Piece) Feature

• Includes 5 pairs of color-coded test leads with 1 1/2" alligator clips at both ends
• 16 gauge heavy insulation copper wire; 20" length.
• Each clip is crimped to ensure a good conduction.
• Good quality clips that close well and a strong spring to keep it closed
• Made In China

10 Pc Set, Color Coded vinyl covered alligator clips. Each clip is crimped to ensure a good conduction. Good quality clips that close well and a strong spring to keep it closed. 10 piece set contains two of each: Black, red, white, green, and yellow. 22 gauge heavy insulation copper wire, 12 in. length.

Sinometer MS8211 Pen-Type Auto-Ranging Digital Multimeter with Non-contact AC Voltage Detector

Sinometer MS8211 Pen-Type Auto-Ranging Digital Multimeter with Non-contact AC Voltage Detector Review

Sinometer MS8211 Pen-Type Auto-Ranging Digital Multimeter with Non-contact AC Voltage Detector Feature

• Pen-type Pocket-size DMM with Non-contact AC Voltage Sensor
• Sensitivity adjustable for non-contact detection
• Retractable tip with sound and flash warning
• Data hold & Maximum value hold
• 1 Year Manufacturer's Warranty

The Sinometer MS8211 is a pen-type digital multimeter with non-contact AC voltage sensor, it can measure AC/DC Voltage, Resistance, Diode and Continuity test. Its unique non-contact AC voltage sensor is a great feature for electric inspection, the maximum detection distance can be as far as 6 inches depending on the adjustable sensitivity. Features: Conforms to the IEC1010-1 standard Cat III 600V Over-molding rubber case protects meter, Display: 1,999 counts, Auto/manual range, Maximum value hold, Data hold, Auto power off Retractable tip, Sensitivity of AC voltage adjustable, Sound and flash alarm. Technical Specifications:" DCV: 200m/2/20/200/600V +/-0.7%, ACV: 200m/2/20/200/600V +/-0.8%, Resistance: 200/2k/20k/200k/2M/20M +/-1.2%, Continuity test, Diode test, Non-contact AC voltage detector, Power: 1.5V (AAA) x 2, Size: 208 x 38 x 29mm, Weight: Approx. 110g (including batteries). What's in the box: Mastech MS8211 Pen-Type DMM, Battery 1.5V (AAA) x 2, Carrying Bag, Manual, Test lead.

Greenlee AM-6 Analog Multimeter

Greenlee AM-6 Analog Multimeter Review

Greenlee AM-6 Analog Multimeter Feature

• Easy to read, multi-function display
• AC/DC voltage, DC amperage measurement
• Built-in test leads, no loose parts to lose
• Tests 1.5-Volt and 9-Volt batteries
• Resistance measurement

Greenlee Textron AM-6 Analog MultimeterGreenlee Textron AM-6 Analog Multimeter Features:;Analog multimeter;Easy to read multifunction;Built in test leads with no loose parts to lose;Resistance measurements;AC/DC voltage;DC amperage measurements;Test 1.5 volt and 9 volt batteries;Carded

Greenlee DM-40 Manual Ranging 600 Volt Multimeter Checks AC/DC Voltage, DC Amperage and Temperature Measurement

Greenlee DM-40 Manual Ranging 600 Volt Multimeter Checks AC/DC Voltage, DC Amperage and Temperature Measurement Review

Greenlee DM-40 Manual Ranging 600 Volt Multimeter Checks AC/DC Voltage, DC Amperage and Temperature Measurement Feature

• Audible continuity and diode tests
• AC/DC voltage, DC amperage measurement
• Resistance measurement

Greenlee Textron DM-40 600 Volt Digital MultimeterGreenlee Textron DM-40 600 Volt Digital Multimeter Features:;Multipurpose meter for most electrical needs;Elastomer boot to protect meter from damage;AC/DC voltage;DC amperage measurement;Temperature measurement;Audible continuity and diode tests;Test 1.5 volt and 9 volt batteries;600 volt measurement;Lifetime limited warranty

Pocket-size analog multimeter, YG188

Pocket-size analog multimeter, YG188 Review

Pocket-size analog multimeter, YG188 Feature

• An anolog multimeter with good qualtiy
• 16 position rotary function and range selector
• Fuse and diode protection
• small in size and light in weight, easy to carry
• 90 days money back guarantee

DCV:0-2.5-10-50-250-500V ACV:0-10-50-500V DCA:0-500u-10m-250mA R: X10-X10k dB:-10-+22dB Battery test: 1.5V & 9V Package includes: a pair of test leads, one AA battery and manual

Fluke Corporation 322 AC Clamp Meter

Fluke Corporation 322 AC Clamp Meter Review

Fluke Corporation 322 AC Clamp Meter Feature

• Small, rugged clamp meter ideally suited for current measurements up to 400 A in tight cable compartments
• Offers accurate low current measurements, continuity test function and Fluke reliability
• Mid-size model; ergonomic grip; maximum jaw opening is 1-inch
• Includes color-coded heavy-duty test leads and batteries
• 5 by 8 by 6-inches; weighs 1.8 pounds shipped

The Fluke 322 clamp meter is designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. This small and rugged meter is ideally suited for current measurements in tight cable compartments. The Fluke 322 also offers DC voltage measurements and has a higher resolution for loads below 40 Ah.

This mid-size model has a maximum jaw opening of one inch, and a maximum wire size of 500 MCM. It requires two AAA batteries, which will last for about 250 hours if they're alkaline. With the easy-to-read backlight and the inrush feature, plus a comfortable ergonomic shape, this meter is made to impress.

Fluke AC72 Alligator Clip, Banana Jack

Fluke AC72 Alligator Clip, Banana Jack Review

Fluke AC72 Alligator Clip, Banana Jack Feature

• Intended for use with (dual) 1000V CAT III and 600V CAT IV rated Fluke meter
• Slide-on style insulated alligator clips accept standard probe tips diameters from 0.076" to 0.084"
• Ideal for use with Fluke TL71 and TL75 test probes
  

  Nickel-plated steel jaws open to 5/16"

• Conforms to safety standard IEC 1010-2-031, 1000V CAT III and 600V CAT IV

Fluke AC72 Alligator Clip Set.

Fluke Corporation T5-600 Electrical Tester with Open Jaw Current

Fluke Corporation T5-600 Electrical Tester with Open Jaw Current Review

Fluke Corporation T5-600 Electrical Tester with Open Jaw Current Feature

• Automatically measures-Volt AC and-Volt DC with precise digital resolution
• Displays resistance to 1000 ohms
• Easy and accurate Open Jaw current measurement
• Continuity beeper
• Compact design with neat probe storage

• Electrical tester with OpenJaw™ current
• The T5 electrical tester lets you check voltage, continuity and current with one compact tool
• All you have to do is select volts, ohms, or current and the tester does the rest
• OpenJaw™ current lets you check current up to 100A - without breaking the current

Fluke 233 Remote Display Multimeter

Fluke 233 Remote Display Multimeter Review

Fluke 233 Remote Display Multimeter Feature

• True-rms AC voltage and current for accurate measurements on non-linear signals
• Low power wireless technology allows the display to be carried up to 10 meters (33 feet) away from the point of measurement for added flexibility
• Removable magnetic display can be conveniently mounted where it is easily seen
• Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
• Battery life: 400 hours

Fluke 233 True-rms Wireless DMM with Detachable Remote Display Wireless remote display is like having an extra hand. Now there's no need to hold meter to read measurements. Just detach display and find a comfortable position to view test data up to 33 feet away from dirty or noisy environments; see readings when test point is in another room or hidden behind equipment; run tests a safe distance from moving machinery and shock and arc flash hazards. Features: Radio transmitter automatically turns off when display is connected to meter True-rms ac voltage and current for accurate measurements on non-linear signals Built-in thermometer allows temperature readings Use as conventional multimeter when display is connected Auto off saves battery life Low power wireless technology does not interfere with measurement accuracy Captures min/max/average reads automatically CAT III 1000V CAT IV 600 V Specs: 6000 count display; Measures Voltage up to 1000 VAC and VDC; Measure Current up to 10A; 10,000 µF Capacitance range; 50 kHz Frequency range; Temperature: -40°C to 400°C, display selectable in °C or °F; Measures Resistance, Continuity and includes Diode Test; Captures variations automatically with Min/Max and Average recording; Battery life approximately 300 hours.Includes:Meter; Test Leads; Alligator clips, AA batteries, Manual and Thermocouple Probe. Three-Year Warranty (Made in USA with US and foreign part)

Gardner Bender GDT-3190 14 Range 4-Function Manual Ranging Digital Multimeter

Gardner Bender GDT-3190 14 Range 4-Function Manual Ranging Digital Multimeter Review

Gardner Bender GDT-3190 14 Range 4-Function Manual Ranging Digital Multimeter Feature

• Digital multimeters test AC Voltage, DC
• Voltage, DC Current, Resistance, Continuity,
• Capacitance, Frequency and Temperature
• Manual style
• Easy to read digital displays

5 Function, Manual Ranging Digital Multimeter, For Most Household Applications, Tests Up To 500 VAC & 600 VDC, 2 M OHM Resistance, 10A Range, Protective Rubber Boot Protects Meter If Dropped & Secures Leads For Storage, Includes Leads, Instruction Manual & Battery, CULUS Approved.

Fluke 175 ESFP True RMS Digital Multimeter, (ENG, SP, FR, POR)

Fluke 175 ESFP True RMS Digital Multimeter, (ENG, SP, FR, POR) Review

Fluke 175 ESFP True RMS Digital Multimeter, (ENG, SP, FR, POR) Feature

• Multi-lingual interfaced (ENG, SP, FR, POR)
• AC voltage and current ranges are specified from 5-Percent of range to 100-Percent of range
• Bar graph updates about 40 times per second
• MIN MAX AVG recording mode captures the minimum and maximum input values
• 6000-Count, 3-3/4-digit display and a bar graph

Setting the new multimeter standard The 175 is the new benchmarks for general purpose multimeters. It sets the standard with a combination of precision, features, ease-of-use, safety and reliability. 6000 count display 0.15% basic DC accuracy All standard DMM functions: AC Volts; DC Volts; Ohms; Diode Test; Auto and Manual Reading; Continuity MIN/MAX/Average Auto Hold and Manual Hold Battery door opens without breaking calibration seal Compatible with TPAK meter hanging kit Capacitance measurement range 1 nF to 9999 uF 0.1 Ohms to 50.00M Ohms range True-rms AC range 0.1 mV to 1000V 0.1mV to 1000V DC range 0.01 mA to 10.00 mA DC range (20A overload for 30 seconds) Frequency measurement range through voltage input 2 Hz to 99.99 kHz Lifetime Warranty Includes Installed 9V battery Test leads Users manual Fluke 175 Calibrated Multimeter (Made in USA with US and foreign parts)

Sinometer 8-Function 20-Range Analog & Digital Multimeter with Battery Tester, 7030

Sinometer 8-Function 20-Range Analog & Digital Multimeter with Battery Tester, 7030 Review

Sinometer 8-Function 20-Range Analog & Digital Multimeter with Battery Tester, 7030 Feature

• AC/DC V/A 0-200uA 0-200mV 20Mohm 1.5/9V Battery Tester
• 1.5V and 9V battery tester
• Zero Adjustment
• Confirms to the EN61010/IEC1010 standard CAT II 600V
• 1 year warranty

The newly introduced Sinometer 7030 analog multimeter is fully featured and can be used to measure AC/DC current and voltage, resistance, as well as diode and continuity buzzer. It also has a built-in 1.5V and 9V battery tester with a 100mA/10mA load respectively. One thing unique about this meter is it comes with a digital display, so you can read both the analog dial and watch the variation of the parameter, and get a fairly accurate reading from the display. Specifications: DC Voltage: 0~200m/2/20/200/600V Digital display: ±0.5% Pointer: ±3%, AC Voltage: 0~2/2/20/200V Digital display: ±0.8% Pointer: ±4%, 200m/600V Digital display: ±1.2% Pointer: ±4% DC Current: 0~200?/2m/20mA Digital display: ±1.0% Pointer: ±3% 200mA Digital display: ±1.2% Pointer: ±3%, 10A Digital display: ±1.5% Pointer: ±3%, AC Current: 0~200?/2m/20mA Digital display: ±1.5% Pointer: ±4%, 200mA Digital display: ±1.8% Pointer: ±4%, 10A Digital display: ±2.0% Pointer: ±4%, Resistance: 0~200/20M? Digital display: ±1.2% Pointer: Pointer: ±3%, 2k/20k/200k/2M? Digital display: ±0.8% Pointer: Pointer: ±3%, Diode Test: Test current: approx 1mA, Test voltage: approx 2.4V, Continuity Buzzer: 0~30? Sound, Battery tester: 1.5V/9V. Accessories include Test leads, 9V battery (installed), Protective holster and User Manual